The Paratronix PTT-03A thickness gauge adopts a mechanical contact measurement method, which is professionally suitable for thickness measurement of various materials such as plastic films, thin sheets, diaphragms, paper, foil, silicon wafers, etc. within the range. execute GB/T 6672、GB/T 451.3、GB/T 6547、ASTM D645、ASTM D374、ASTM D1777、TAPPI T411、ISO 4593、ISO 534、ISO 3034、DIN 53105、DIN 53353、JIS K6250、JIS K6328、JIS K6783、JIS Z1702、BS 3983、BS 4817 According to various standard requirements, it supports manual and automatic dual measurement modes. The automatic mode can set parameters such as injection spacing, measurement points, and injection speed to better meet users' statistical analysis needs. Multiple measurement modes including manual, cyclic, and scheduled, with the testing process fully automated; Easy and convenient operation.

Daily maintenance methods:

After the experiment is completed, the power must be cut off.

Keep the machine clean and cover the entire instrument with a dust-proof cloth during non test machine time.

Operators must be familiar with the equipment manual and electrical principles before conducting routine maintenance and troubleshooting. Customers are strictly prohibited from disassembling the machine without authorization. After sales service personnel must first turn off the power when repairing instruments, and it is strictly prohibited to operate with live power.

The interval time for equipment accuracy verification shall be executed in accordance with relevant specifications.

Note:

Before each work, the measuring head, lower iron, and other parts in contact with the sample should be wiped clean with an alcohol cotton ball. When measuring the sample, the environment around the instrument must meet the requirements, otherwise it will affect the testing accuracy. During the testing process, attention should be paid not to touch the measuring head, measuring rod, iron and other components to avoid affecting the measurement accuracy. When taking the sample, use gloves to avoid leaving fingerprints on the sample and affecting measurement accuracy. The sample must be clean, free from wrinkles and other defects. After the measurement is completed, pay attention to placing the measuring head on the measuring seat and then turning off the power. It is strictly prohibited to dismantle the measuring head without authorization, otherwise the testing accuracy will be lost!